Fit and Size

STEP 1: Measure

Use a measuring tape to measure around your head one inch above your eyebrows. Or use a string to measure and then lay it out and measure the length of the string.

STEP 2: Choose Size

Use the chart to convert measurement to hat size

STEP 3: Select Your Helmet

Select the helmet model you would like to purchase and review the specific size range available and order accordingly.

STEP 1: TRY

1. Open the DialFit™ if the helmet comes with this feature.
2. Try on the helmet. It should fit snug but not be uncomfortable.

STEP 2: Adjust

1. Adjust the inner padding by folding under the FlipFold™ tabs for more or less cushion.
2. Adjust the slide glides on the straps to sit underneath your ears to form a “V“.
3. Adjust the length of the retention system straps to fit snug under your jaw and use the o-rings to secure the excess.
4. To fine tune your fit, engage the DialFit™ or adjust the slider on the elastic bands of the SureFit™.

STEP 3: Check

With your helmet level on your head, check the fit and straps and make sure the buckle is locked securely.